P 680 (Ø6-80mm)
Bar Diameter ø 6mm～ø 80mm
P 680 is an Automatic Bar Loading Magazine for processing bar in diameter range of 6~180mm and in lengths up to 1600mm on CNC lathes.
Unique design to reduce noise and vibration.Allowed high speed machining.
Brand new program deliver fast set-up and more sophisticated demands.
Remote control and monitoring system offer immediate troubleshooting and data collecting.(Optional)
| Model | P 680 |
| Bar Diameter | ⇥●⇤ Ø6mm~80mm ⇥⬡⇤ 5mm~65mm ⇥◼⇤ 5mm~50mm |
| Bar Length | 152mm ~ 1600mm (Bar length depends on spindle length.) |
| Rack Capacity | 700mm Ø9mm x 86(bar) Ø100mm x 8(bar) |
| Bar Pusher | Ø10 Ø19 |
| Automatic Cycle Reload Time | 22sec |
| Feed Speed | 20mm~500mm/sec |
| Power Supply | 220/440VAC 50/60HZ |
| X & Y Axial Track Travel | 740mm |
| Weight | 350KG |
Recommend
V 65 (Ø5-65mm)
Bar Diameter ø 5.0mm～ø 65mm
High loading speed, specially developed design.
No special requirements or restrictions on material straightness.
Accommodate raw bars.
Lathe spindle speed can be maximized.
Material can be round, hexagonal and shaped.
Large magazine loading capacity reduces bar supply frequency.
Easy to operate and maintain, small footprint.
Various parameter setting, alarm detection and function display.
Vs 65 (Ø5-65mm)
Bar Diameter ø 5mm～ø 65mm
No special requirements or restrictions on material straightness.
Accommodate raw bars.
Lathe spindle speed can be maximized.
Material can be round,hexagonal and shaped.
Large magazine loading capacity reduces bar supply frequency.
Easy to oprate and maintain.
Various parameter setting,alarm detection and function display.
V 566s (Ø5-65mm)
No special requirements or restrictions on material straightness.
Accommodate raw bars.
Lathe spindle speed can be maximized.
Material can be round,hexagonal and shaped.
Large magazine loading capacity reduces bar supply frequency.
Easy to oprate and maintain.
Various parameter setting,alarm detection and function display.
TECH 998 (Ø9-102mm)
Bar Diameter ø 8.0mm～ø 102mm
Mitsubishi servomotor and AX2N PLC.
All other settings are keyed in on the screen.
Adjustable faceplate conforms to operator use.
Easy to operate by remote control box.
Various feeding torques can be applied on different diameters,weights and lengths to minimize to distort the bar.
Automatic positioning to the spindle center without any manualadjustments. Material size is directly input on the screen.
Loaded material impacts and rests on urethane.
Easy to change spindle linear and maintain.
It is unnecessary to purchase optional sliding rail.
T 899 (Ø9-102mm)
Bar Diameter ø 8.0mm～ø 102mm
Mitsubishi servomotor and AX2N PLC.
All other settings are keyed in on the screen.
Adjustable faceplate conforms to operator use.
Easy to operate by remote control box.
Various feeding torques can be applied on different diameters,weights and lengths to minimize to distort the bar.
Automatic positioning to the spindle center without any manualadjustments. Material size is directly input on the screen.
Loaded material impacts and rests on urethane.
Easy to change spindle linear and maintain.
It is unnecessary to purchase optional sliding rail.