TECH998
Bar Diameter ø 9.0mm~ø 100mm
Mitsubishi servomotor and AX2N PLC.
All other settings are keyed in on the screen.
Adjustable faceplate conforms to operator use.
Easy to operate by remote control box.
Various feeding torques can be applied on different diameters,weights and lengths to minimize to distort the bar.
Automatic positioning to the spindle center without any manualadjustments. Material size is directly input on the screen.
Loaded material impacts and rests on urethane.
Easy to change spindle linear and maintain.
It is unnecessary to purchase optional sliding rail.
Mitsubishi servomotor and AX2N PLC.
All other settings are keyed in on the screen.
Adjustable faceplate conforms to operator use.
Easy to operate by remote control box.
Various feeding torques can be applied on different diameters,weights and lengths to minimize to distort the bar.
Automatic positioning to the spindle center without any manualadjustments. Material size is directly input on the screen.
Loaded material impacts and rests on urethane.
Easy to change spindle linear and maintain.
It is unnecessary to purchase optional sliding rail.
Model :
TECH998
Model | TECH998 |
Bar Diameter | 9-100mm |
Bar Length | 250-1600mm(Bar length depends on spindle length.) |
Centerline Height | 850-1150mm |
Bar Pusher | ø10 , ø19 |
Automatic Cycle Reload Time | 22(sec) |
Feed Speed | 20mm-500mm/(sec) |
Power Supply | 3Phase 200~240VAC 5A 50/60HZ |
Magazine Capacity | 780mm ø10mm x 78(bar) |
Design and specifications are subject to change without prior notice.
特色
-
Multi-language human/machine interface.
Multi-parameters settings function and display present situation and position.
Automatically set by the feeder system when bar diameter is keyed in.
Alarm message function display.
Alarm message item and time can be looked up.



-
Offers maximum operational convenience and easy adjustment.
